2435 Short Lever Handle Latchbolt
Keyless, Keypad, Combination Entry Door Latchbolt Lock
with Key Override option
Lockey 2435
Lever Handle Latchbolt Lock
Keyless, Keypad, Combination Entry Door
Latchbolt Lock |
|
Video Demo
(click to play, pause, or share)
|
EASY OPEN & AUTO LOCKING! This lock is just like the 2230 Keyless Keypad Latchbolt Lock, except that it has a hold-back feature and a lever handle on the inside.
This lock is installed and operated very much like a standard deadbolt lock—it is installed in the hole in the door where the deadbolt would normally go.
Like all our latchbolt locks, this model comes with a burglar-proof plunger that slides along the inside of the latchbolt and provides added safety. If you install it properly, a burglar won't be able to open your door with a credit card or knife blade.
The hold-back feature holds the latchbolt in a retracted position, inside the door. This can be a wonderful temporary convenience whenver you are going in and out a lot. And the lever handle on the inside gives you leverage for easier turning.
Advantages
- Comes with a Manufacturer's Lifetime Warranty.
- Hacksaw-proof, bump-proof and unpickable.
- Never again worry about lost, stolen or copied keys.
- AC power, wires, or batteries aren't needed--this lock
is completely mechanical. Therefore, power failures don't affect lock.
- Easy installation on standard doors.
- Mechanical reliability.
- Completely weatherproof finishes. Be sure to select the Marine Grade finish for salt-water environments.
- And best of all, the first time you change the combination,
this lock will pay for itself by saving the cost of a locksmith..
Setting your Secret Code
Please note this lock is shipped with 5 red (code) and 10 blue (non-code) tumblers. This allows for a 5 digit code. If you would like to use more or less letter/numbers, please add PT05 Tumblers to your cart.
Want us to set your initial secret code? Simply select the "Custom" option under the Initial Secret Code section
below and enter your desired custom code (no repeating digits) in the text box. Your code can be anywhere between 3 and 5 digits.
Lock Features
- This lock is a latchbolt lock, which means it locks automatically when the door is shut.
- Comes with a hold-back feature, which means it can remain unlocked and will keep the latchbolt retracted inside the door.
- This lock can be used on doors from 1-3/16" to 2" thick.
If your door is between 2" to 5" please order the 2000
Series
PT12 Lockey Extension Kit.
- Comes with a 2 3/4"
or 2 3/8"
backset. An adjustable backset
upgrade is available for a small fee. If you are planning to use this lock with our
PT01 Lockey Gate Box, be sure to order the 2-3/8" deadbolt.
- Covers a 2-1/8" hole.
- This lock can be changed from right to left hand doors.
- We offer a
PT02 Lockey Oversized Knob for this lock that fits over the outside knob.
Installation
This replaces or can be used with your existing deadbolt, latchbolt, or dummy lever. Please click here to view our optional
PT34 Lever Dummy Handles or our
PT35 Lever Passage Handles. Click to view the
2435 Installation Instructions that come with each purchase.
Locking and Unlocking
Using all of our keyless digital locks is quick and easy. Since this lock has a latchbolt it will automatically lock when the door is closed unless you have enabled the hold-back feature.
- To unlock from the inside, just push the lever handle down.
- To unlock from the outside, simply type in your secret code on the keypad and turn the knob to retract the latchbolt.
You'll be amazed at how easily it works!
Key Overrides
A key override is a handy option that lets you lock and
unlock these locks using a key OR a combination. This is
really great if you have multiple locks with different combinations.
- A key override is available on most 2000 series locks.

- If you order more than one lock with the key override
option, you have the option to have them keyed alike or keyed differently.
- Locks with key overrides are installed exactly the same
way as regular locks. If you want to make additional key copies, please order the
PT19 Lockey Key Blank.
- Lockey key override locks cannot be keyed alike to any other brand.
- This popular item is available in most finishes. Please see below for available finishes.
- The additional cost is added at the time you add an item
to your cart.
- Manufacturer's Lifetime Warranty does not apply to locks with key override.
Elegant Lock Finishes
Our locks also have a new 7-coat finish, heavy duty zinc alloy, stainless steel and brass components and new, changeable brass
combination pins. There are many beautiful finishes (subject to availability) to complement a luxury home, modern office, or
stylish garden gate:
- Antique Brass
- Bright Brass
- Bright Chrome
- Jet Black
- Red
- Satin Chrome
- Satin Nickel
- White
|
|
2435 Lock Dimensions
Outside
Lock Body
|
Height: |
5-9/16 in |
Width: |
1-5/8 in |
Depth: |
7/8 in |
Inside
Lock Body
|
Height: |
5-9/16 in |
Width: |
1-5/8 in |
Depth: |
11/16 in |
| Outside Knob |
Height: |
1-1/4 in |
Width: |
1-1/4 in |
Depth: |
11/16 in |
Trim Plate
(optional) |
Height: |
6-1/2 in |
Width: |
2-1/2 in |
Depth: |
1/4 in |
| Strike Plate |
Height: |
2-3/16 in |
Width: |
1 in |
Outside
Lock Body and Knob |
Height: |
5-9/16 in |
Width: |
1-5/8 in |
Depth: |
1-1/2 in |
Inside
Lock Body and Lever Handle |
Height: |
5-9/16 in |
Width: |
1-5/8 in |
Depth: |
1-3/4 in |
Additional Notes
- If you are going to install this lock underneath an existing deadbolt, you will need at least 3-1/2
inches from the bottom of the deadbolt down to the top of the large hole for this lock.
- If you are going to install this lock above an existing deadbolt, you will need at least 3-1/2
inches from the bottom of the deadbolt down to the top of the large hole for this lock.
- The bore hole should be between 1 inch to 2-1/8 inches.
2435 Short Lever Handle Latchbolt
Keyless Keypad Combination Entry Door Latchbolt Lock
with Key Override option
Please choose the options you want, then click ADD TO CART below:

Antique Brass

2-3/8in

No, thanks

TEXT

No