7070N Adams Rite Retrofit Latchbolt
Keyless, Key Pad, Combination Entry Adams Rite Door Lock
High-Security Model
AN ADAMS RITE LOCK! The 7070N is a narrow, keyless combination lock with a lever handle that can take repeated digits in the combination. It is designed to completely replace cylinder and the outside body of the Adams Rite® lock on a door with an exit paddle. Not for use with a panic bar.
Advantages
-
Comes with a Manufacturer's Lifetime Warranty.
-
Hacksaw-proof, bump-proof and unpickable.
-
Never again worry about lost, stolen or copied keys.
-
AC power, wires, or batteries aren't needed--this lock is completely mechanical. Therefore, power failures don't affect lock.
-
Easy installation on standard doors.
-
Mechanical reliability.
-
Completely weatherproof finishes.
-
a
-
And best of all, the first time you change the combination, this lock will pay for itself by saving the cost of a locksmith.
|
 |
Setting your Secret Code
Please note this lock is shipped with 6 red (code), 9 blue (non-code), and 2 green (double-code) tumblers. This allows for a 6 digit code. If you would like to use more or less letter/numbers, please add PT05 Tumblers to your cart.
This lock lets you use a repeated digit in your secret code, which gives you added security. To use this feature, if you set your secret code to 12267 for example, to open your lock, just enter:
-
1 once
-
2 twice
-
6 once
-
7 once
Want us to set your initial secret code? Simply select the "Custom" option under the Initial Secret Code section below and enter your desired custom code (no repeating digits) in the text box.
Lock Features
-
Comes with option to have a double digit in the code.
-
Retrofits Adams Rite Locks.
-
Narrow style.
-
Covers a 2-1/8" hole.
-
Works with an exit paddle. If you need an Exit Paddle, please add PT38 Exit Paddle.
-
For right or left handed doors.
Lock Dimensions
7070N Adams Rite Retrofit Latchbolt
Keyless, Key Pad, Combination Entry Door Adams Rite Lock
|
|
|
Height
|
Width
|
Depth
|
|
Outside Lock Body (without lever handle) |
7-3/4 in
|
1-3/4 in
|
1-1/2 in
|
|
Outside Lock Body (with lever handle) |
7-3/4 in
|
6-1/2 in
|
2-1/2 in
|
|
Outside Lever Handle |
1-5/16 in
|
4-3/4in
|
1 in
|
|
CAM Disc |
1-1/8 in
|
1-1/8 in
|
3/4 in
|
|
Trim Plate |
12-1/2 in
|
2 in
|
5/16 in
|
|
Trim Plate Cover |
4-7/8 in
|
1-3/8 in
|
2-1/2 in
|
|
Note: If you are going to install this lock underneath an existing dead bolt, you will need at least 5-3/4 inches from the bottom of the dead bolt down to the center of the large 2-1/8 inch hole for this lock.
|
7070N Adams Rite Retrofit Latchbolt
Keyless, Key Pad, Combination Entry Adams Rtie Door Lock
High-Security Model
