Free Shipping from KeylessEntryLocks.com!

Track Orders


Lockey 2200 Slide-Bar Deadbolt Lock

Key Features

  • Deadbolt security
  • Surface Mount
  • Narrow Stile
  • Both long and short bar included
  • Works like a standard deadbolt -- does not lock itself -- you must lock it manually
  • Optional key override
  • Easy to change combination
  • Adjustable back set
  • Changeable handing
  • Over-sized knob available
  • 100% Weatherproof
  • Marine-grade option
  • All mechanical—no batteries, wires, or power
  • High-security— guaranteed un-pickable and un-bumpable if ordered without a key override
  • Life-time mechanical warranty if ordered without a key override



Life-Time Mechanical Warranty 30-Day Money Back Guarantee All Weather High Security All Mechanical-needs no electricity
This video is for the 2210, but also applies to the 2200:




Product Dimensions chart for

BUY NOW!

Starting at: $159.44  $108.86
Save: 32% off

Select the Options You Want:


Some colors are not available on all locks.



(1) A double-sided lock with a keyoverride has a key hole on the outside only. (2) The Lockey Life-Time Warranty is not available on any lock with a key override option.


Google Product Category:

Hardware > Locks & Locksmithing



Lockey Colors
(click to enlarge)

Pay less when you buy more! 1,2
1
$108.86
2-4
$105.59
5-9
$103.42
10-19
$101.24
20+
$99.06

1 This table shows the starting price, not including any additional options.

2 The additional cost of options selected (if any) are not discounted.




Specifications

  • BOLT TYPE: slide-bar deadbolt (must be locked manually).
  • DOOR THICKNESS: fits standard doors (1-3/8" to 2" thick); Thick Door Kit available (up to 5" thick); Thin door adjustment available (from 1/4" to 7/8" thick).
  • DOOR TYPE: for chain link fence gates that swing on hinges; for exterior gates that swing on hinges; for interior doors that swing on hinges.
  • FINISHES: antique brass; bright brass; bright chrome; jet black; marine-grade Teflon finish; oil rubbed bronze; satin chrome; satin nickel; white.
  • GATE BOX: matching gate box available .
  • HANDEDNESS: reversible (can be installed on left or right side).
  • HANDLE: round, flat knob on outside; thumb turn on inside.
  • INSTALLATION: surface-mounted on door.
  • KEY OVERRIDE: available as an option.
  • KEYPAD: single-sided (on one side only).
  • MAX CODES AT 1 TIME: 1 per keypad.
  • MAX DIFFERENT CODES POSSIBLE: 8191.
  • NETWORK: none (standalone).
  • POWER REQUIRED: none, this product is 100% mechanical.
  • REPEATING DIGITS ALLOWED IN CODE: no.
  • SECURITY LEVEL: high security if no key override.
  • USAGE: heavy-duty commercial; residential use.
  • WARRANTY: Life-Time Mechanical unless ordered with key override.
  • WEATHER: 100% weatherproof .

Details

2200 Keyless Surface Mount Lock Inside View on Gate
  • Small profile to fit in narrow spaces.
  • Works with both right and left hand doors.
  • Slider bar extends out from lock body 7/8" or 2-1/4". Slider bars of both lengths are included.
  • Maximum security with free-spinning stainless steel core shaft that cannot be cut with a hacksaw.
  • This lock fits any standard door 1" to 2" thick.
  • Can also be installed on a thick or thin door/gate. If your door is between 2" to 5" thick, just order the PT12 Lockey Thick Door Kit. If your door is 1/4" to 1" thick, please order PT17 Lockey Thin Door Kit.
  • Trim plate (included) covers a 2-1/8" hole.
  • We offer a PT02 Lockey Oversized Knob for this lock that fits over the outside knob.

 

Lock Dimensions

Outside
Lock Body
Height:
5-5/8 in
Width:
1-5/8 in
Depth:
1-5/8 in
Inside
Lock Body
Height:
5-5/8 in
Width:
1-5/8 in
Depth:
1-5/8 in
Outside Knob
Height:
1-1/4 in
Width:
1-1/4 in
Depth:
2/3 in
Inside Thumb Turn
Height:
1 in
Width:
1/4 in
Depth:
3/4 in
Trim Plate
(optional)
Height:
6-1/2 in
Width:
2-1/2 in
Depth:
1/4 in
Slider Bars
Please note: the extension (measurement of how far the bolt extends when the lock is in the locked position) is:
  • Short slider bar: 7/8"
  • Long slider bar: 2-1/4 " 
A long slider bar will work on a gate with a gap of up to 2" (roughly) between the gate post and the gate itself as long as the lock in installed right at the edge of the gate. 

The throw for both slider bars is the same: 3/4", so each bar will only move 3/4" to the left or right when the knob is turned to unlock the lock. Therefore, the slider bar could extend past the edge of the gate when unlocked. This is usually an acceptable trade off for situations where there is a wide gap between the gate and the post because moving the gate or the post closer to each other is usually much more difficult.
Height:
1-1/4 in
Width:
3-7/8 in
Depth:
5/16 in
Extension:
either
7/8 in
or
2-1/4 in
Strike Plate
Height:
2-3/16 in
Width:
1 in
Outside
Lock Body and Knob
Height:
5-9/16 in
Width:
1-5/8 in
Depth:
1-1/2
Inside
Lock Body Thumb Turn and Short Slider Bar
Height:
5-9/16 in
Width:
2 in
Depth:
11/16 in

 

Other Dimensions

Diameter of the Large Bore Hole (for the Spindle):
Diameter of opening for the flat spindle (aka "tail piece") 1/2″ to 2-1/8″

Distance From an Existing Deadbolt:
If you are going to install this lock underneath an existing deadbolt, you will need at least 3-1/2 inches from the bottom of the deadbolt down to the top of the large hole for this lock. Call for details.
If you are going to install this lock above an existing deadbolt, you will need at least 3-1/2 inches from the bottom of the deadbolt down to the top of the large hole for this lock. Call for details.

 

Locking and Unlocking

UNLOCKING a keypad combination lock is quick and easy:

  • On the inside, you don't need the combination to lock this lock—just turn the turn knob or thumb turn to retract the deadbolt.
  • On the outside, first press the "C" button or turn the thumb turn as far as it will go. This will clear out any previous keypad entries.
  • Next, enter in the secret code.
  • Finally, turn the knob, lever handle, or thumb turn to retract the deadbolt.

LOCKING is even easier:

  • Just turn the knob, lever handle, or thumbturn to extend the deadbolt into the locked position. You don't even need to enter the code.

It is so easy, once you've tried it, you'll wonder how you lived without it!

UNLOCKING a keypad combination lock is quick and easy:

  • On the inside, you don't need the combination to lock this lock—just turn the turn knob or thumb turn to retract the deadbolt.
  • On the outside, first press the "C" button or turn the thumb turn as far as it will go. This will clear out any previous keypad entries.
  • Next, enter in the secret code.
  • Finally, turn the knob, lever handle, or thumb turn to retract the deadbolt.

LOCKING is even easier:

  • Just turn the knob, lever handle, or thumbturn to extend the deadbolt into the locked position. You don't even need to enter the code.

It is so easy, once you've tried it, you'll wonder how you lived without it!

 

Key Override

A key override is a handy option that lets you lock and unlock these locks using a key OR a combination. This is really great if you have multiple locks with different combinations.

  • A key override is available on most 2000 series locks.
  • If you order more than one lock with the key override option, you have the option to have them keyed alike or keyed differently.
  • Locks with key overrides are installed exactly the same way as regular locks. If you want to make additional key copies, please order the PT19 Lockey Key Blank.
  • Lockey key override locks cannot be keyed alike to any other brand.
  • This popular item is available in most finishes. Please see below for available finishes.
  • The additional cost is added at the time you add an item to your cart.
  • Please Note: Manufacturer's Lifetime Warranty does not apply to locks with key override.
Google Product Category: 503730

Search Terms: Keyless combination keypad lock surface mount lock, key pad, high-security, bump-proof, pick-proof, weatherproof, mechanical, marine grade, passage mode. Lockey 2200