High-quality, affordable locks that you can open without a key

Track Orders


Lockey TB Series Hydraulic Gate Closers (TB200,TB400,TB600,TB250+,TB450+,TB650+)

FOR SWINGING GATES
  • The TB Series Gate Closers are economic and reliable automatic gate closers for use on commercial or residential gates.
  • Unlike normal closing springs, the TB Series does not slam gates shut; rather it firmly pushes the gate closed, making it ideal for use with Lockey security locks and other latching devices.
  • The closing speed is pre-set to provide a controlled close of approximately 6 seconds, depending on the weight of the gate.



30-Day Money Back Guarantee All Weather All Mechanical-needs no electricity



Starting at: $288.50  $224.25
Save: 22% off

Options:



Google Product Category:

Hardware > Hardware Accessories


Instant discounts when you buy more than 1
1
$224.25
2-4
$219.25
5-9
$216.25
10-19
$214.25
20+
$213.25

1 This table shows the starting price, not including any additional options.

2 The additional cost of options selected (if any) are not discounted.




Key Features

  • Light, medium or heavy-duty models
  • Chose from fixed or adjustable speed
  • Installs on top, middle, or bottom of gates
  • Mounts on open side of gate and pushes gate closed
  • Easy install: mounting brackets and fitting bar included
  • 100° maximum opening angle
  • Compatible with Chain Link (use TB-LINX Kits)
  • Replacement cylinders available
  • Black, grey, white or stainless finishes
  • Easy to install on timber or steel gates
  • Unbelievably quiet operation
  • No clockwork mechanisms
  • Pre-set controlled closing speed
  • Low opening hand forces
  • Robust construction

Fixed Speed Gate Closers

  • Easily and gently closes small or large gates up to 250 lbs
  • Hydraulic/nitrogen gas controlled closing speed
  • Installs on side, top, middle or bottom of right or left hand gates
  • Mounts on opening side of gate, pushing the gate closed
  • Maximum opening angle of 110 degrees (use of a mechanical stop to restrict opening angle is recommended)
  • Mounting brackets and fitting bar included
  • Available in black or stainless steel finish

Adjustable Speed Gate Closers

  • Quick and easy installation for both in-line and offset hinge arrangements.
  • Adjustable hydraulic (nitrogen gas) controlled closing speed.
  • Suitable for use with Lockey's keyless security locks.
  • Made of steel with a bright zinc plate finish. 
  • Installation instructions for Adjustable Gate Closers

Opening Force Chart

Added Opening Force 36" Gate 48" Gate 60" Gate Constant Closing
Pressure
   No Closer 3/4 lbs 1/2 lbs 1/4 lbs 0 lbs
   Light-Duty Adjustable (TB-250+) 6 lbs 4 lbs 3 lbs 45 lbs
   Medium-Duty Adjustable  (TB-450+) 10 lbs 8 lbs 6 lbs 90 lbs
   Heavy-Duty Adjustable  (TB-650+) 13 lbs 10 lbs 8 lbs 135 lbs

Added Force at 45° Open

36" Gate 48" Gate 60" Gate
   Light-Duty Adjustable   (TB-250+) 7 lbs 5 lbs 4.5 lbs
   Medium-Duty Adjustable (TB-450+) 13 lbs 9.5 lbs 8 lbs
   Heavy-Duty Adjustable (TB-650+) 18.5 lbs 13.5 lbs 12 lbs

Additional Notes on Forces

  1. All measurements are taken using the 1st mounting hole on the post bracket with a 3" distance between the center of the hinge and the center of the post mounting bracket. 
  2. The opening pressure will INCREASE using the 2nd, 3rd and 4th holes. 
  3. These are "ADDED" opening pressures. 
  4. This chart DOES NOT take into consideration the hinge arrangements, quality of hinges, ease of operation,wind, etc.

Technical Overview

Light Duty
(TB200/250+)
Medium Duty
(TB400/450+)
Heavy Duty
(TB600/650+)
Max Gate Weight 50-125 lbs 75-175 lbs 150-250 lbs
Max Gate Width 36-52 inches 40-64 inches 44-72 inches
Max Opening Angle 110° 110° 110°
Type of Gate Material Vinyl, Steel, Wood Vinyl, Steel, Wood Vinyl, Steel, Wood
Closing/Latch Method Hydraulic/Nitrogen Gas Hydraulic/Nitrogen Gas Hydraulic/Nitrogen Gas
Material Steel or Stainless Steel Steel or Stainless Steel Steel or Stainless Steel
Color Black or Stainless Steel Black or Stainless Steel Black or Stainless Steel
Hinge Arrangements In-line or Offset In-line or Offset In-line or Offset
Opening Pressure Approx 3-7 lbs Approx 6-12 lbs Approx 8-18 lbs
Google Product Category: Hardware > Locks & Locksmithing

Search Terms: Lockey Lockey TB Series Hydraulic Gate Closers