Click for details about our Winter Sale

Lockey Replacement Spindle (aka tailpiece)


  • A spindle is a flat metal bar that goes from the outside lock body through the door or gate and fits into the slot on the inside lock body.
  • When you turn the handle, it rotates and retracts the bolt (deadbolt, latchbolt, hookbolt, slide bar, etc) so that the lock can be opened.
  • These lock replacement parts are the standard ones that come in the box with Lockey keypad locks, so they only fit standard prep doors.
  • If you have a thick door, you should order the Lockey Thick Door Kit (Extension Kit) which has extra hex bolts and a much longer spindle instead of one of these.
  • SPINDLES FOR LOCKEY PANIC BAR LOCKS: Lockey does not yet sell twisted spindles for their panic bar locks (115P, 160P, 285P, or 310P). If you need a spindle for one of these, you may order a standard (i.e., flat) spindle and put a twist in it yourself at your own risk. However, the twist needs to be correct to retract the latch on the panic bar. You can easily tell if it is by putting the lock on the door, attaching the panic bar on the inside, and opening the lock. If the latch retracts properly, the twist is correct. IMPORTANT: Please note that doing this is considered a customer modification which is unsupported. That means, if you break the spindle in the process, we will not provide you with a free replacement.



Videos



check BUY WITH CONFIDENCE!

Brand-New, Authentic, Manufacturer-Authorized,
and Full Warranty GUARANTEED!  check

Starting at: $6.99   MSRP: $7.99

SALE:  $6.99
Save: 13% off (MAP) check

Select the Options You Want:


The first few numbers of a lock model number determines the lock series. For example, a 2200 lock would be part of the 2000-Series. Each Series may include single and double-sided locks.






Specifications

  • PARTS/SERVICES: handy items for replacement, repair, or to just have on hand.

Additional Information

  • All Lockey lock spindles are flat (like an egg-noodle). They look like a straight line when you look at them end-on, not a star or a square.
  • Some Lockey lock spindles have a twist in them on one end.
  • If you have a lock or spindle with a star-shaped or square spinde, it won't work on a Lockey lock.
  • Door lock spindles are usually a little longer than you need so they can be cut down to whatever length you need. You can do this either by bending the spindle along one of the scored, indented lines (called "break away points") and bending it back and forth to break it or by cutting it with pliers.
  • Spindles should be cut to a slightly shorter length (about 1/8") than the final distance between the lock bodies. This is so that when the lock bodies are screwed tightly onto the door, the spindle ends will extend into the slots in both lock bodies, but their tips will not touch and drag, which would make it difficult to retract the bolt.

Dimensons

Lock Model Spindle Length (approximate)
Lockey 2830 & 2835 3.95 inches
Lockey 1150 & 1600 3.94 inches
Lockey C-Series, M-Series, 2000-Series, & 3000-Series Two spindles:
2.99 inches (30-45mm)
3.38 inches (40-55mm)


30-Day Money Back Guarantee All Weather All Mechanical-needs no electricity
Google Product Category: 503730 - Hardware > Locks & Keys > Locks & Latches


Product 41/45

 Prev 
 Return to the Product List 
 Next