Lockey 1150 Heavy-Duty Passage Lever-Handle Latchbolt Keypad Lock

Specifications

• BOLT TYPE: Locks with a large, block-shaped latchbolt that is mortised (inserted) into the edge of a door and that lock automatically; Locks with a tube-shaped latchbolt that is inserted into a door's edge. These are spring-loaded and lock automatically.
• CODE LENGTH: from all to none of the numbers or letters on the keypad except C and R.
• DOOR THICKNESS: fits standard doors (1-3/8" to 2" thick); Thick Door Kit available (up to 5" thick).
• DOOR/GATE TYPE: locks for standard doors/gates that swing and are made of wood/vinyl/glass/metal, with/without vertical posts or pickets.
• HANDLE: Locks with reversible lever-handles which can be used on either the left or the right side of a door and can be ADA compliant.
• INSTALLATION: bolt is inserted into edge of door; used on metal or wooden door or gate.
• KEYPAD: single-sided (on one side only).
• MAX CODES AT 1 TIME: 1 per keypad.
• MODES: Locks automatically.
• NETWORK: none (standalone).
• POWER: none, this product is mechanical.
• PRODUCT LINE: Lockey 1000 Series.
• REPEATING DIGITS ALLOWED IN CODE: no.
• SECURITY LEVEL: (locks that cannot be picked or bumped because they do not have a key cylinder (aka key override)).
• WARRANTY: Life-Time Mechanical Warranty.
• WAYS TO LOCK/UNLOCK: unlocks by using a keypad on the outside only.
• WEATHER RESISTANCE: Locks that can be exposed to the weather on both the outside and the inside; Locks which are designed for exposure to saltwater from the ocean or road and/or blowing sand.

Programming

• Max number of codes: 1
• Code can be changed as many times as you want. See: How to Change the Code
• Code can be 0-9, X, Z
• Code can be entered into the door handle's keypad in any order
• Code can be set to 4095 different combinations

Installation

• Can Replace Your Existing Lock— the Lockey 1150, 1150DC, 1600, and 1600DC locks can be used to completely replace an existing deadbolt, latchbolt, or just a plain door knob. Just take off your existing door hardware and install this one in its place. It has been designed to easily retrofit onto standard doors.
• Can be Used with Your Existing Lock—you can also leave your existing lock in place and install this lock either above or below it for added security and convenience. If you do this, people who know your secret code will only be able to enter when both locks are unlocked, perhaps, during the day, for example.

Documentation

• 1150 & 1600 Installation Instructions & Templates

Backset Measurement

All our locks will come standard with an adjustable backset at no extra charge, so there is usually no need to measure your door or specify that dimension when you place your order.

Watch this short video if you would like to see how to change the backset from 2-3/8" to 2-3/4" or vice versa. The video shows this being done on a Lockey adjustable deadbolt, but the process is similar for a Lockey adjustable latchbolt as well as for other manufacturers.

How to Adjust the Backset on a Lockey Deadbolt

If you would like to determine what the backset measurement is for your door or gate, just measure distance shown by the red arrows in the diagram below.

 

NOTE: The diagram above shows an deadbolt, but the same measurement applies to a latchbolt.